This is a simple circuit. Just use a single IC, but the amplifier has 4 channels, 11 channels per watt, which is Philip IC TDA1554 number suitable for listening at home or in any vehicle. Just because the power supply 12-15 volt or will be used to expand any home theater sound system. The first 2-channel amplifier front speakers. And 2 to extend the back surround sound speakers also.
This circuit power supply 12 volts to 18 volts Power consumption at 5A. The input 4 input pins 1, 2, 17 and 18 is divided into a horizontal input inverter Ting 2 channels (Pin 1, 17). inverse model and input object 2 channels (pins 2, 6). That we can use that. To output phase to phase or did not return. The output will be the fourth slot on the leg 6, 8, 12, 10, with a C7-C10 serves to increase the low frequency stability better before you go to the speaker. The switch S1 acts on mute by pressing S1 will be closed sound system circuit in Mute, and if open circuit S1 standby ready to work. The C5 and C6 will filter light to smooth out and eliminate interference.
This circuit power supply 12 volts to 18 volts Power consumption at 5A. The input 4 input pins 1, 2, 17 and 18 is divided into a horizontal input inverter Ting 2 channels (Pin 1, 17). inverse model and input object 2 channels (pins 2, 6). That we can use that. To output phase to phase or did not return. The output will be the fourth slot on the leg 6, 8, 12, 10, with a C7-C10 serves to increase the low frequency stability better before you go to the speaker. The switch S1 acts on mute by pressing S1 will be closed sound system circuit in Mute, and if open circuit S1 standby ready to work. The C5 and C6 will filter light to smooth out and eliminate interference.
